Load data for .32 S&W Long Wad Cut. + .312 | 100gr | Speer JHP

Recommended Powder(s): Maxam CSB 2, SNPE Vectan BA9 1/2, Vihtavuori N330

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.312 \| 100gr \| Speer JHP
Manufacturer SKU:	3981
Bullet Weight:	100gr \| 6.5g
Bullet Diameter:	0.312" \| 7.92mm
Bullet Length:	0.560" \| 14.2mm
Caliber:	.32 S&W Long Wad Cut. load data
Case Length (l3):	0.913" \| 23.2mm
Cartridge Length (C.O.L.):	0.985" \| 25.0mm
Seated Depth:	0.488" \| 12.4mm
Shank Seated Depth:	0.488" \| 12.4mm
Case Capacity:	14.8 Grains of Water \| 0.96 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	22481 psi \| 1550 bar
LID:	LID_B6184_C418
Last updated:	2025-01-01

Load data for 74 loads in caliber .32 S&W Long Wad Cut. with .312 | 100gr | Speer JHP bullet and 37 powders such as Maxam CSB 2, SNPE Vectan BA9 1/2, Vihtavuori N330. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 70N	<<locked>>	66%	18246	81%	**5	99%
ADI APS 450	<<locked>>	66%	19174	85%	**0	100%
ADI AS 30	<<locked>>	72%	19812	88%	**0	100%
ADI AS 50N	<<locked>>	69%	19290	86%	**6	100%
Accurate No. 2	<<locked>>	75%	20131	90%	**2	91%
Accurate Solo 1000	<<locked>>	67%	17970	80%	**3	100%
Accurate Solo 1250	<<locked>>	78%	17941	80%	**2	98%
Alliant BULLSEYE	<<locked>>	70%	19711	88%	**8	95%
Alliant UNIQUE	<<locked>>	82%	18942	84%	**8	94%
Baschieri & Pellagri 100	<<locked>>	73%	18275	81%	**6	100%
[Hodgdon HS-6]*	<<locked>>	69%	19740	88%	**8	84%
[Hodgdon Longshot]*	<<locked>>	65%	19072	85%	**8	86%
Hodgdon Universal	<<locked>>	73%	18246	81%	**5	99%
Lovex S011	<<locked>>	64%	19943	89%	**2	100%
Lovex S020	<<locked>>	76%	19319	86%	**8	97%
Maxam CSB 1	<<locked>>	84%	19450	86%	**5	99%
Maxam CSB 2 👍	<<locked>>	87%	19798	88%	**1	100%
Maxam CSB 3	<<locked>>	76%	18666	83%	**2	100%
Maxam CSB 4	<<locked>>	72%	18550	83%	**6	100%
Maxam CSB 5	<<locked>>	69%	19769	88%	**3	100%
Ramshot Silhouette	<<locked>>	68%	19348	86%	**5	92%
[Ramshot True Blue]*	<<locked>>	64%	19754	88%	**5	86%
ReloadSwiss RS 12	<<locked>>	74%	19783	88%	**5	100%
ReloadSwiss RS 20	<<locked>>	88%	20059	89%	**4	97%
Rottweil P 801	<<locked>>	67%	19551	87%	**9	100%
SNPE Vectan A0	<<locked>>	83%	19551	87%	**9	94%
SNPE Vectan BA 9	<<locked>>	72%	18449	82%	**3	97%
[SNPE Vectan BA7 1/2]*	<<locked>>	89%	18956	84%	**5	84%
SNPE Vectan BA9 1/2 👍	<<locked>>	77%	19812	88%	**5	99%
Somchem MP200	<<locked>>	76%	19899	88%	**8	93%
Somchem MS200	<<locked>>	76%	18304	81%	**6	95%
[Vihtavuori 3N37]*	<<locked>>	85%	18478	82%	**5	86%
Vihtavuori N320	<<locked>>	74%	19043	85%	**6	100%
Vihtavuori N32C Tin Star	<<locked>>	94%	16302	73%	**3	100%
Vihtavuori N330 👍	<<locked>>	81%	20189	90%	**1	100%
Vihtavuori N340	<<locked>>	80%	18623	83%	**2	94%
[Vihtavuori N350]*	<<locked>>	90%	19377	86%	**5	87%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 70N	<<locked>>	61%	16186	72%	**3	98%
ADI APS 450	<<locked>>	60%	16360	73%	**8	100%
ADI AS 30	<<locked>>	60%	14504	64%	**4	100%
[ADI AS 50N]²	<<locked>>	59%	14489	64%	**4	100%
[Accurate No. 2]*	<<locked>>	61%	13140	58%	**1	84%
Accurate Solo 1000	<<locked>>	62%	15229	68%	**7	100%
Accurate Solo 1250	<<locked>>	62%	11777	52%	**8	93%
Alliant BULLSEYE	<<locked>>	61%	15171	67%	**3	92%
[Alliant UNIQUE]*	<<locked>>	63%	11560	51%	**4	86%
Baschieri & Pellagri 100	<<locked>>	62%	13663	61%	**8	99%
[Hodgdon HS-6]*	<<locked>>	66%	17956	80%	**5	82%
[Hodgdon Longshot]*	<<locked>>	62%	16998	76%	**9	84%
Hodgdon Universal	<<locked>>	63%	14199	63%	**0	97%
Lovex S011	<<locked>>	60%	17564	78%	**3	99%
Lovex S020	<<locked>>	63%	12937	58%	**7	91%
Maxam CSB 1	<<locked>>	63%	11327	50%	**1	93%
Maxam CSB 2	<<locked>>	61%	9645	43%	**5	97%
[Maxam CSB 3]²	<<locked>>	59%	12009	53%	**5	98%
Maxam CSB 4	<<locked>>	61%	13750	61%	**7	100%
Maxam CSB 5	<<locked>>	63%	16795	75%	**7	100%
[Ramshot Silhouette]*	<<locked>>	61%	15374	68%	**0	88%
[Ramshot True Blue]*	<<locked>>	61%	17695	79%	**9	84%
ReloadSwiss RS 12	<<locked>>	60%	12821	57%	**0	100%
[ReloadSwiss RS 20]*	<<locked>>	60%	9544	42%	**2	84%
Rottweil P 801	<<locked>>	62%	16926	75%	**6	100%
[SNPE Vectan A0]*	<<locked>>	63%	11763	52%	**8	85%
SNPE Vectan BA 9	<<locked>>	63%	14431	64%	**1	94%
[SNPE Vectan BA7 1/2]*	<<locked>>	81%	15229	68%	**3	80%
SNPE Vectan BA9 1/2	<<locked>>	63%	13285	59%	**4	95%
[Somchem MP200]*²	<<locked>>	59%	12343	55%	**8	85%
[Somchem MS200]*	<<locked>>	62%	12633	56%	**4	89%
[Vihtavuori 3N37]*	<<locked>>	77%	14765	66%	**6	82%
Vihtavuori N320	<<locked>>	64%	13982	62%	**7	100%
Vihtavuori N32C Tin Star	<<locked>>	69%	8978	40%	**6	100%
Vihtavuori N330	<<locked>>	62%	11531	51%	**1	95%
[Vihtavuori N340]*	<<locked>>	61%	10907	48%	**1	85%
[Vihtavuori N350]*	<<locked>>	77%	13924	62%	**3	80%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.